Visco Fuse Making Machines: Dry Way vs Wet Way

Visco fuse, also called safety fuse or green fuse, is used throughout fireworks and firecracker production. YOVON builds fuse making machines for both production methods: the dry way and the wet way.

Dry way vs wet way

The two methods use different processes. A dry-way machine works without glue or water, and its production cost is lower.

A wet-way machine uses water and glue. It is safer to run, which is why YOVON generally recommends the wet way.

Choosing a machine by output

These are the YOVON fuse machines and their main figures:

1 line, dry way: fuse 1.2–6 mm, 800 m/h

2 lines, dry way: fuse 1.2–6 mm, 800 m/h

2 lines with computer, dry way: fuse 1.2–5 mm, 10–12 m/min, about 16 km per 12 hours

6/4 threads, wet way: fuse 1.8–5 mm, 10–12 m/min

Paper fuse, 4 threads, wet way: fuse 1.8–5 mm, 36 m/min

Finished fuse can be cut to length with the YOVON visco safe fuse cutter machine.

Operation, delivery and support

Each machine needs one operator. All YOVON machines can be built to your requirements. Delivery takes 15 days, and every machine comes with a 1-year warranty, free installation videos and online guidance. An engineer can also visit your factory for training at an extra cost.

YOVON has exported fireworks machinery to 29 countries, including India, Vietnam, Turkey, Brazil, Germany, Spain, the United States and South Africa.

Get a quote

Tell us the fuse type, diameter and daily output you need, and we will recommend a machine and send a quotation. Contact YOVON on WhatsApp at +86 130 5516 9594 or through the contact page.